标题: 解释一下 [打印本页] 作者: xuchen 时间: 2004-3-10 22:26 标题: 解释一下 1. Make a bootable system floppy disk by typing [FORMAT A:/S] from the DOS prompt.
2. Download the BIOS file from MSI web page.
3. Extract the BIOS file into the bootable floppy.
4. Boot up system with the bootable floppy disk.
5. Run Award (Ex. Awdfl770) or AMI (Ex. amifl822.exe) Flash utility & follow the on-screen
instructions.
6. After flashing the BIOS, reboot system, press [DEL] to go into BIOS setup.
7. Select [Load Setup Default] for or [Load Optimized Defaults] and press Key [Enter] and
press Key [Y].
8. Press Key [F10] than answer [Y] to reboot system again and finish upgrade procedure.作者: 元宝姐姐 时间: 2004-3-10 22:27
干吗 刷BIOS吗？ 作者: xuchen 时间: 2004-3-10 22:28
shi de作者: Guevara 时间: 2004-3-10 22:32
1.在dos下用format c：/s制作启动盘
2.从MSI网站下载bios文件
3.把bios文件解压到启动盘上
4.用启动盘启动
5.运行Award (Ex. Awdfl770) 或者 AMI (Ex. amifl822.exe) 刷新程序并按照屏幕提示操作
6.刷新好以后重新启动，按del进入bios设置
7.选择[Load Setup Default] 或者[Load Optimized Defaults]，然后按ENTER和“Y”
8.按F10并回答Y，重新启动，完成bios刷新过程。
